Fixture Tests; Fixture Information; Reset Functions - Chauvet Legand 230SR BEAM User Manual

Operation

Fixture Tests

Automatic Fixture Test
Manual Fixture Test

Fixture Information

Fixture Operation Timer
Lamp Operation Timer
Firmware Version

Reset Functions

Pan/Tilt Reset
Shutter/Prism Reset
14
From the Main Menu, highlight Display Settings and press <ENTER>.
1. Highlight Auto Test.
2. To start the built-in test sequence, press <ENTER>.
a. The product will start the test sequence.
b. You can stop the test by pressing <MENU>.
c. Return to the previous menu.
The automatic fixture test runs only once after activation.
1. Highlight Manual Test and press <ENTER>.
2. Highlight the desired attribute.
3. To change the value of the selected attribute, press <ENTER>.
a. Set the attribute value (000~255).
b. Accept the new value.
4. Repeat steps 2 and 3 for the other attributes.
5. When done with the test, exit to the previous menu (the values of all tested channels
will go back to zero).
From the Main Menu, highlight Fixture Information and press <ENTER.
1. Highlight Fixture Use Time (the accumulated product's operation time will show).
You cannot modify or reset the fixture operation timer.
1. Highlight Lamp On Time (the accumulated lamp's operation time will show).
2. To reset the lamp operation timer, press <ENTER>.
a. Select Reset Time to reset the timer or Exit to exit without resetting.
b. Accept the selected option.
1. Highlight Firmware Version.
2. To see the firmware versions installed, press <ENTER>.
a. The display will show the current firmware version for each of the four CPU
boards (A through D) in the product.
b. Return to the previous menu.
From the Main Menu, highlight Reset and press <ENTER>.
You can leave this sub-menu at any time by pressing <MENU>.
1. Highlight Pan/Tilt and press <ENTER>.
a. Select YES to reset the pan and tilt movements to their home positions.
b. Accept the selected option.
1. Highlight Shutter/Prism and press <ENTER>.
a. Select YES to reset the shutter and dimmer to their home positions.
b. Accept the selected option.
Legend™ 230SR Beam User Manual Rev. 1