Setup
Mounting
Orientation
Rigging
Product Mounting Diagram
10
Before mounting this product, read and follow the
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
CHAUVET® recommends the following general guidelines when mounting this product:.
• When selecting an installation location, consider easy access to this product for
operation, programming adjustments, and routine maintenance.
• Make sure to mount this product away from any flammable material as indicated in
the
Safety
Notes.
• Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
• If hanging this product, make sure that the mounting location can support the
product's weight. Refer to the
requirements of this product.
• When hanging this product, always secure to a fastening device using a safety
chain/cable (not included).
The Legend™ 230SR Beam comes with a preinstalled mounting bracket to which you
will be able to attach the 2 included omega clamps. Use two mounting points per
product. In addition, use a safety cable (not included) to link the product to the structure.
Overhead Mounting
Safety
Notes.
Technical Specifications
Legend™ 230SR Beam User Manual Rev. 1
chart for the weight-bearing
Floor Mounting