Setting The Dmx Address; Control Panel Functions - Chauvet LEG-4500 User Manual

Setting the DMX address

Each fixture requires a "start address" from 1 to 512. A fixture requiring one or more channels
for control begins to read the data on the channel indicated by the start address. For example,
a fixture that occupies or uses 7 channels of DMX and was addressed to start on DMX channel
100, would read data from channels: 100, 101, 102, 103, 104, 105 and 106. Choose start
addresses so that the channels used do not overlap and note the start address selected for
future reference. The Legend™ 4500 uses up to 9 channels of DMX. If this is your first time
using DMX, we recommend reading the DMX Primer in the Appendix Section.

Control Panel Functions

All fixture functions and settings are accessible via the built-in control panel interface.
B
UTTON
MENU
ENTER
DOWN
UP
Legend™ 4500 User Manual
MENU
ENTER
F
UNCTION
Exits from the current menu or function
Enables the currently displayed menu or sets the currently selected value in to
the selected function
Navigates upwards through the menu list and increases the numeric value
when in a function
Navigates downwards through the menu list and decreases the numeric value
when in a function
DOWN
UP
14
12/10/2008 4:28 PM