Table of Contents Table of Contents 1. Before You Begin ......................1 What is Included ..........................1 Unpacking Instructions ........................1 Text Conventions..........................1 Icons .............................. 1 Safety Notes ........................... 2 Expected LED Lifespan ........................2 2. Introduction ........................3 Product Description ........................3 Features ............................
Page 4
Table of Contents Menu Map ............................ 14 DMX Values ..........................15 TOUR ..............................15 ARC1 ..............................16 ARC1 + D ..............................16 ARC2 ..............................16 ARC2 + D ..............................16 ARC2 + S ..............................17 HSV ................................ 17 5. Technical Information ....................18 General Maintenance ........................
Before you Begin 1. Before You Begin What is • One COLORado™ 2 Tour • One power cable with Edison plug (US) Included • One barn doors frame • Warranty Card • Quick Start Guide Unpacking Immediately upon receiving this product, carefully unpack it and check the container in which you received it.
There are no user serviceable parts inside this product. Any reference to servicing it you may find from now on in this User Manual will only apply to properly CHAUVET® certified technicians. Do not open the housing or attempt any repairs unless you are one of them.
Introduction 2. Introduction Product The COLORado™ 2 Tour is an RGBW wash light based on 48 LEDs. It consists of a single pod with a double bracket mounting yoke. The AC power comes directly into Description the fixture’s housing through a NEUTRIK® powerCON A socket. The power linking uses a NEUTRIK®...
Introduction DMX Channel Summary DMX Channel Function TOUR Dimmer Green Blue White Color Macro + White Balance + HyperColor™ Strobe Programs Auto Speed Adjust Dimmer Speed ID Address ARC1 DMX Channel Function Green Blue AR1 + D DMX Channel Function Dimmer Green Blue...
Introduction Product Overview Safety cable passageway Power In Power Out DMX In DMX Out A: 0.3 in/8.5 mm B: 0.5 in/13 mm Control Panel COLORado™ 2 Tour User Manual Rev. 02b...
Fuse Replacement The COLORado™ 2 Tour fixture has no external fuse for the user to change. However, it does have an internal fuse that only an authorized CHAUVET® technician should change. DMX Linking If you are using the COLORado™...
Setup Master/Slave The Master/Slave mode allows one COLORado™ 2 Tour (the master) running a preconfigured program to control several other COLORado™ 2 Tour fixtures (the Linking slaves) without requiring a DMX controller. In this mode, all the slave fixtures will operate in unison with the master fixture.
This fixture includes a mounting yoke to which you can attach one or two rigging clamps. You must supply your own “C” or “O” clamps and make sure that they are capable of supporting the weight of this fixture. CHAUVET® recommends using at least two mounting points per fixture.
Operation 4. Operation Control Panel Button Function Exits from the current menu or Description <MENU> function Enables the currently displayed menu or sets the currently <ENTER> selected value into the current function Navigates upwards through the <UP> menu list or increases the numeric value when in a function Navigates downwards through <DOWN>...
Operation Continued from previous page DMX Control With ID In this mode, the fixtures with the same DMX starting address will respond to the DMX controller based on the fixture’s individual ID address setting. If the user selects ID Addressing address “0”, all the fixtures with the same DMX address will respond in unison.
Operation Continued from previous page Master/Slave The Master/Slave mode allows a group of COLORado™ 2 Tour fixtures (the slaves) to execute simultaneously the same program, whether auto or custom, that another COLORado™ 2 Tour fixture (the master) is executing. This mode works only without a DMX controller.
Operation Continued from previous page Control Panel Lock This setting allows the user to activate or disable the control panel lock, which keeps non-authorized personnel from changing the fixture’s settings. 1) Press <MENU> repeatedly until KEY shows; press <ENTER> to accept. 2) Use <UP>...
Operation Continued from previous page White Balance This setting allows the user to select the white color shown by the COLORado™ 2 Tour when the DMX controller’s Red, Green, and Blue faders are set to “255”. 1) Press <MENU> repeatedly until CAL2 shows; press <ENTER> to accept. 2) Press <MENU>...
Operation DMX Values TOUR Channel Function Value Percent/Setting 000 255 0~100% Master Dimmer 000 255 0~100% (or Step Time when playing CUS. 01~10) 000 255 0~100% (or Fade Time when playing CUS. 01~10) Green 000 255 0~100% Blue 000 ...
Operation Continued from previous page TOUR (Cont.) Channel Function Value Setting Value Setting Value Setting 000 009 All IDs ID 23 ID 46 010 019 ID 1 ID 24 ID 47 020 029 ID 2 ID 25 ID 48 030 ...
Operation Continued from previous page ARC2 + S Channel Function Value Percent/Setting 000 255 0~100% Master Dimmer 000 255 0~100% 000 255 0~100% Green 000 255 0~100% Blue 000 255 0~100% White 000 010 No function Strobe 011 ...
Dust build up reduces light output performance and can cause overheating. This can lead to reduced light source life and increased mechanical wear. CHAUVET® recommends cleaning the fixture’s external optics with a soft cloth using normal glass cleaning fluid.
#32 • Interference from AC wires • Keep DMX cables separated from power cables or black lights If you still experience technical problems after trying the above solutions, contact CHAUVET® Technical Support. COLORado™ 2 Tour User Manual Rev. 02b -19-...
Technical Information Exploded View Item Description Front cover Rubber seal Front tempered glass Lens complete set LED board Heat sink Bracket Power connection board Display / Main board Display protection metal plate Safety chain plate LED driver board Voltage regulator board (5 V) Power supply (24 V) Not Shown DMX In socket...
The user must clearly label the package with a Return Merchandise Authorization Number (RMA #). CHAUVET® will refuse any product returned without an RMA #. DO NOT write the RMA # directly on the box. Instead, write it on a properly affixed label.
Technical Information Technical Specifications Weight & Dimensions Length ............................10.8 in (276 mm) Width ............................12 in (305 mm) Height ............................9.0 in (230 mm) Weight ............................20 lbs (9.1 kg) Power Auto-ranging ........................100~240 V, 50/60 Hz Fuse (internal) ............................. 2 A, 250 V Power Consumption ........
Page 28
CHAUVET® 5200 NW 108th Avenue Sunrise, FL 33351 (800) 762-1084 – (954) 929-1115 FAX (954) 929-5560 www.chauvetlighting.com COLORado™ 2 Tour User Manual Rev. 02b September 2010...