Menu Functions - Chauvet COLORado 1VW Quick Start Manual

DMX
Personality
Menu
Functions
COLORado 1 VW Quick Start Guide Rev. 02
1) Go to MENU > PERS and select any DMX personality.
2) Make sure to rearrange the DMX addresses of all fixtures in the current
DMX universe to avoid address overlapping.
M O
ENU PTION
Static Color
Used to create different temperatures of white by using the
STAI
Cool, Warm and Dimmer commands. It also allows for
strobe frequency changes.
DMX Mode
dMX
Sets the DMX starting address of the fixture.
Run
RUN
Sets the fixture to run in DMX or Slave mode.
Personalization:
PERS Determines the fixture's DMX personality, whether CW,
CW + d, Studio 1 or Studio 2.
ID Address
Id
Sets the fixture's ID address. The fixture's ID address is
accessible from channel 6 when in the Studio 2 personality.
Set
Used to upload the custom programs from one fixture to
SET another, to reset the custom programs to the factory
defaults, to modify the password. and to enable/disable the
ID address feature.
Password
Turns the password protection on or off. If turned on, you
must enter a password to gain access to the control panel.
PASS
The static (non-modifiable) password is:
<UP>, <DOWN>, <UP>, and <DOWN>).
Calibration
CALI Allows the calibration of the Cool and Warm white for up to
eight different white temperatures.
Operation
D
ESCRIPTION
9