Fisher & Paykel OR120 Installation And Use Instructions Manual page 48

Freestanding cooker double oven models
Hide thumbs Also See for OR120:
Table of Contents

Advertisement

Care and cleaning
46
Replacing the oven lamp
1 Switch the power to the cooker off at the wall.
2 Let the oven cavity and the heating elements cool down.
3 Remove the protective cover "C".
4 Unscrew and replace the bulb "B" with a new one suitable for high temperatures (300°C), with
the following specifications: 230-240V, 50Hz, E14 and same wattage as the bulb being replaced
(check wattage stamped on the bulb).
5 Refit the protective cover "C".
Note: oven bulb replacement is not covered by your warranty.
C
B
Fig.50 Removing the oven lamp

Advertisement

Table of Contents
loading

Table of Contents