Table of Contents
Advertisement
Care and cleaning
37
Cleaning the inside of your ovens
Do not use abrasive cleaners, cloths or pads to clean the enamel.
If you have purchased and installed catalytic panels, do not use any oven cleaners, abrasive
cleaners, ammonia-based cleaners, products containing acids or alkalis or detergents on them.
Fixing screw
Fig.39 Removing the side racks
(and catalytic panels if installed)
To make cleaning easier, you can remove the side racks, the oven door, and the fat filter.
Drop-down grill element
To lower the grill element: use a flat-head screwdriver or a small coin to loosen the element
fixing screw.
When you have finished cleaning the oven ceiling, raise the grill element and screw the element
fixing screw back onto the stud. Make sure that the fixing screw is tightened and the element is
held securely in place.
The grill element itself is self-cleaning.
Fixing screw
Stud
Fig.40 Drop-down grill element
Advertisement
Table of Contents
