Table of Contents
Advertisement
Installation instructions
8
0 mm
+ 8 mm
Fig. 4b Do not use the supplied nuts for height
adjustments between 0 and 8 mm
Levelling the cooker
Important!
Using the supplied adjustable feet is
MANDATORY. For safety reasons and to
ensure adequate ventilation, the cooker
chassis MUST NOT sit directly on the floor, a
plinth, or other support surface.
The cooker is already fitted with six
levelling feet.
Level the cooker by screwing or
unscrewing the feet (Fig. 4d).
Make sure you follow the instructions in
Figs. 4a, 4b, and 4c.
Note: nuts are supplied with the cooker
Fig. 4a
in a separate kit.
+ 8 mm
+ 12 mm
Fig. 4c Use the supplied nuts for
height adjustments between 8 and 12 mm
Fig. 4d Screw/unscrew the
feet to get the required height
Advertisement
Table of Contents
