Table of Contents
Advertisement
Semi-rapid
burner
Triple ring wok
burner
Dual burner
Injectors for
outer crowns
Installation instructions
Injector
Fig. 14a
Injector
Fig. 14b
Replacing the injectors
If the injectors are not supplied, contact
your nearest Fisher & Paykel Authorised
Service Centre.
To replace the injectors:
Remove the trivets and burners from
1
the cooktop.
Using a spanner, remove the injectors
2
(Figs.14a,14b,14c) and replace them
with the ones according to the gas
type (see the 'Table for the choice of
injectors').
Fix the warning label (supplied with the
3
conversion kit) at the back of the cooker,
near the gas inlet connections. This label
states that the gas cooktop has been
converted for use with LPG/Natural gas.
The burners are designed so that
adjustment of primary air is not
required.
Injector for inner crown
15
Fig. 14c
Advertisement
Table of Contents
