The Main Phone Menus - Avaya 1408 Manual

1.9 The Main Phone Menus

The main menus are detailed below. You can move between them using the
a call including when a call is alerting. In addition the menus are accessible from the call appearance menu by pressing
the Status and Features soft keys when they are displayed.
The Appearance Menu
Idle
Active
The Status Menu
The Features Menu
The Button Features Menu
1408, 1416, 1608 and 1616 Phone Guide
IP Office
This menu is used to display information about the
configured for appearance functions. These will normally be the first 3 button on
the phone but the system administrator can configure additional buttons.
Using the up and down
each of the buttons.
The display for buttons that currently have a call in progress will show details of
the associated call.
The display for buttons that are idle will show the default label for the button
and also soft key labels for accessing the other main menus.
Those buttons that have not been configured as appearance buttons can be used
as feature buttons .
116
The Status menu is not always visible. It is shown when you have any special
call routing features active. For example do not disturb switched on.
It is also shown if the system administrator has given you the rights to change
the status of your hunt group memberships or to change the service status of
the hunt groups.
A summary of the menu options is shown in the
The Features menu is used to access and configure range of your user settings.
The system administrator can control some of the options that will be available
to you within the menu. Typically these are settings stored by the telephone
system which will be applicable even if you login at another phone.
A summary of the menu options is shown in the
diagram .
167
Those buttons not configured by the system administrators as appearance
buttons can be used for other special features.
The button feature can be accessed by pressing the appropriate button. However
they can also be accessed through the Button Features section of the Features
menu (press the Features soft key and selecting Button Features). The
and down arrow keys can then be used to scroll through the programmed
buttons. The associated button will briefly flash its red lamp.
The action of each button is normally set by the system administrator. However
you can also use the self-administer menu
buttons.
PHONE key. You can do this even during
arrow keys you can scroll through the details of
Status Menu diagram
IP Office Features menu
to select and assign actions to the
116
15-601040 Issue 04d (25 January 2011)
buttons that have been
.
171
up
Page 16