Setting The Time Offset - Avaya 1408 Manual

21.5 Setting the Time Offset

1. Press the Features soft key if shown.
· To access the menu during a call, press the
the Features soft key.
2. Use the up and down
3. Press the Select soft key or the OK button or the
4. Use the up and down
present then you may not have been configured as a system phone user by your system administrator.
5. Press the Select soft key.
6. Enter your security code (this is the same as your login code) and press the Done soft key.
7. Use the up and down arrow keys to scroll the display to the option Time Offset or UTC Offset.
8. Press the Select soft key or the OK button or the
9. Enter the offset required in hours and minutes:
· To enter the : separator press either the * or # key.
· To delete the previous digit or character entered press the
· To change the offset from between positive or negative press the +/- soft key.
10.When a valid offset has been entered, the Done soft key is displayed.
11.To apply the offset to the current telephone system time press the Done soft key.
1408, 1416, 1608 and 1616 Phone Guide
IP Office
right arrow key or press the
arrow keys to scroll the display to the option Phone User.
arrow keys to scroll the display to the option System Admin. If the option is not
System Administration: Setting the Time
right arrow key.
right arrow key. The current offset is displayed.
left arrow key.
PHONE key and then press
15-601040 Issue 04d (25 January 2011)
Page 161