Accessing The Options Main Menus - Avaya 4610SW User Manual

4610SW SIP IP Telephone Options

Accessing the Options Main Menus

To access the Options main menus:
1. To access the Options application, press the Options button (
below the softkeys.
The telephone displays the first of four Options Main screens.
2. Use the standard paging indicators to move between the four Options Main screens.
The three options categories the first Options Main screen displays are as follows:
●
- Application Options: provides access to allow you to set the Redial option, set the
Phone screen display upon answering or calling options, set the display of Call
Timers, set the rate at which messages display across the top of the screen, set Visual
Alerting (flashing message light on incoming calls), and disable or enable the Call Log.
- View IP Settings: provides access to the View Status Main screen #1, from which
you may view IP Address information/status, quality of service (audio and signaling)
status, and interfaces status, and the View Status Main screen #2, from which you
may view miscellaneous telephone/status data.
- Network Audio Quality: provides access to the Audio Status screen #1, on which
you can troubleshoot received coding, packet loss and packetization delay, and the
Audio Status screen #2, on which you can troubleshoot network delay and audio
quality. Note that this option is available only when you are on a call.
The three options categories the second Options Main screen displays are:
●
- Contrast Control: provides access to the Contrast Option screen, on which you
adjust the 4610SW display area contrast.
- Feature Button Labeling: allows you to customize a label on a Feature button, if
desired.
- Log off: allows you to log the telephone off for privacy and security purposes.
The three options on the third Options Main screen are:
●
- Backup/Restore: provides access to the Backup/Restore Main screen. You can
then set automatic data backups, restore the previous backup file, or set up and verify
the status of your File Transfer Protocol (FTP).
- Select display language: you can change the display from the current language to
any of seven alternate languages.
- PC Ethernet Interface: allows you to specify communications settings between your
telephone and PC (if attached).
60 4610SW SIP IP Telephone Release 2.2 User Guide
) to the right of and