Wall Mounting The Chassis (3-Slot) - Alcatel OmniSwitch/Router Getting Started Manual

c. Attach the second bracket to the opposite front
end of the chassis using the remaining screws.
d. Carefully lift the chassis and insert it into the
rack.
e. Attach both brackets to the rack by screwing in
the rack screws.
6 Installing Your Switch

Wall Mounting the Chassis (3-Slot)

To wall mount a 3-slot switch chassis, the following
items are required:
• 2 wall-mounting brackets (optional)
• Phillips flat-head 100 degree screws (included)
• Standard, wall-mounting screws (not included)
• Drill (not included)
• Phillips screwdriver (not included)
Only the 3-slot version of the Omni
Switch/Router can be wall mounted.
The 5-slot and 9-slot models cannot be
wall mounted.
Follow these steps to wall mount a switch chassis:
a. Locate an area that allows easy access to the
switching modules and power supply once the
chassis is mounted.
The weight of a fully-loaded 3-slot
chassis is approximately 18 lbs. (8.18
kg.). Be sure to choose a suitable
location that can support the weight
of the fully-loaded chassis.
o Note o
Caution