Table of Contents
Advertisement
Switching Modules
s on switching modules vary by the network inter-
LED
face type and by a module's application. However, two
s are common to all switching modules. These
LED
s,
and
, provide information on the hard-
LED
OK1
OK2
ware and software status, respectively, of the module.
These two
are located at the top of the modules,
LEDs
as shown in the following figure.
(Hardware Status). On Green
OK1
when the module has passed diagnos-
Module
tic tests successfully. On Amber when
the hardware has failed diagnostics or
LEDs
if the corresponding image file for the
module is not in flash memory.
(Software Status). Blinking Green
OK2
when the module software was down-
loaded successfully and the module is
communicating with the
Amber when the module is in a transi-
tional state. On solid Amber if the
module failed to download software
from the
.
MPX
Switching Module LEDs
. Blinking
MPX
OmniS/R Basics 21
Advertisement
Table of Contents
