Loading A System Configuration From A Usb Flash Drive - Lorex LH158 Instruction Manual

Using the Main Menu
want to backup your current settings.
NOTE: This function only saves settings
created in system menus. It does not
save or backup any video.
To save your system configuration to a
USB flash drive (not included):
1 Insert a USB flash drive (not included) into
one of the USB ports.
2 Right-click to open the Menu Bar and click
Main Menu (
3 Click Advanced and select the Maintain
tab.
4 Click Save Settings. Wait for the system to
save your settings.
Click to save all system settings to a USB flash drive
Loading a System Configuration
from a USB Flash Drive
1 Insert a USB flash drive (not included) that
contains a saved configuration to a USB
port. See above for details on how to save
your DVR configuration.
2 Right-click to open the Menu Bar and click
Main Menu (
3 Click Advanced and select the Maintain
tab.
4 Click Load Settings. The DVR will load the
saved settings from the USB flash drive
and then restart.
56
).
).