Configuring Ddns Settings - Lorex LH158 Instruction Manual

Using the PC/Mac Client Software
• SSL: Select ON/OFF to enable/disable Secure Socket Layer protocol.
• SMTP Port: Enter your SMTP address.
• SMTP Server: Enter your SMTP Server.
• Sender Email: Enter the sender email address. This can be any address of your choice.
• Sender Password: Enter your email server's password.
• Receiver Email: Enter the recipient's email address.
• Interval: Enter the interval the DVR waits before sending a new email notification.
2 Click Save to save your settings.

Configuring DDNS Settings

Lorex DDNS is available as an optional connectivity option. Please see "Appendix F: DDNS
Setup (Advanced)" on page 119 for details.
The primary connectivity option uses the Lorex Stratus service to connect to your system
over the Internet without requiring port forwarding or DDNS registration For details, See
"Connecting to Your DVR Over the Internet on PC or Mac" on page 57.
To configure DDNS settings:
1 Visit http://www.lorexddns.net
2 Click the Remote Setting tab, and click DDNS.
3 Configure the following:
• DDNS: Select Enable or Disable.
• In the Server drop-down menu, select LOREXDDNS.
• Domain Name: Enter your Domain name/URL Request from the confirmation email that was
sent after you created your DDNS account.
• User name: Enter your DDNS User Name that was emailed to you after DDNS registration.
• Password: Enter your DDNS Device password that was emailed to you after DDNS registration.
4 Click Save to apply your settings.
74
and register for a free Lorex DDNS account.