Appendix D: Recording Audio - Lorex LH158 Instruction Manual

Appendix D: Recording Audio

The system can also record audio for up to 4 channels (16-channel models) or 8 channels
(8-channel model). You must have audio-capable cameras (not included) or self-powered
microphones (not included) in order to record audio on the system.
8-channel model shown
To enable audio recording:
1 Connect the BNC video cable from the camera to one of the BNC Video INPUT ports on the
rear panel of the DVR between 1 and 4 (16-channel models) or any Video Input port
(8-channel). For example, connect the camera to Video INPUT port 1.
2 Connect the RCA audio cable from the camera to the corresponding Audio INPUT. Following
the example in step 1, you would connect the cable to Audio INPUT port 1.
3 Right-click to open the Menu Bar and click the Main Menu button (
4 Click Record and select the MainStream tab.
5 Ensure the Audio checkbox is checked next to the channel the audio-enabled camera is
connected to.
6 Click Apply to save your changes.
Connect an RCA audio cable from the camera
into the corresponding Audio INPUT port
Check Audio to enable audio
recording on each channel
Appendix D: Recording Audio
).
111