Lorex LH158 Instruction Manual page 133

• If installing a 2.5" hard drive, place the hard drive over one of the two sets of screw holes with
the power and data connectors facing the center of the DVR. Hold the hard drive in place and
carefully turn the DVR over. Insert 4 hard drive screws to secure the hard drive. Turn the DVR
back over.
4 Connect the power and data cables.
5 Replace the DVR cover.
Place the hard drive over the screw holes
with the power and data connectors facing
the center of the DVR
Remove the hard drive screws
Appendix E: Replacing the Hard Drive
Make sure to hold the hard
drive in place while
removing the hard drive
screws and turning the DVR
to avoid damaging the DVR.
117