Manually Upgrading System Firmware - Lorex LH158 Instruction Manual

To configure firmware auto upgrades:
1 Click the Remote Setting tab, and click Advanced>Auto Upgrade.
2 Under Auto Upgrade, select Enable to enable automatic firmware updates. Messages for
firmware upgrades will appear on the DVR locally and via remote software.
3 Check Check for update to enable local messages on the DVR to notify you for updates. The
system will check for firmware upgrades every hour.
NOTE: Click Detect to check for firmware updates manually.
4 Click Save to save changes.

Manually Upgrading System Firmware

To manually upgrade the system firmware, download the latest firmware from the
system's product page at www.lorextechnology.com.
You must have the latest DVR firmware and client software to connect to the DVR over the
Internet.
To upgrade the system firmware:
1 Download and extract the file to your computer's desktop.
2 Click the Remote Setting tab, and click Advanced>Firmware upgrade.
Using the PC/Mac Client Software
81