Rear Panel; 8-Channel - Lorex LH158 Instruction Manual

Rear Panel

8-Channel

1 Video Input: Connect up to 8 BNC cameras.
2 Video Output: Outputs the DVR interface to a BNC connection. This allows you to see your
mouse cursor and have full control of the system on a secondary monitor.
NOTE: Use a BNC to RCA adapter (not included) to connect the DVR to RCA inputs (i.e. for a TV
connection).
3 Audio Input: Connect up to 8 RCA audio-enabled cameras (not included).
4 VGA: Connect a VGA monitor (not included) to view the system interface.
5 PTZ / Alarm Block: Connect compatible PTZ cameras (not included) or alarm devices (not
included).
6 IR-EXT: Service only; not supported.
7 On / Off Switch: Turns the DVR on or off.
8 DC12V: Connect the included AC power adapter.
9 USB Port: Connect a USB mouse (included) or USB flash drive (not included) for data backup
or firmware updates.
10 LAN: Connect a CAT 5 RJ45 Ethernet cable for local and remote connectivity.
11 HDMI: Connect to a HDMI-compatible TV or monitor (not included) to view the system
interface.
12 Audio Output: Output for 1 audio channel (e.g. speakers).
3
2
1
12
4 5
11 10 9 8
6 7
5