Alarm; Configuring Motion Detection - Lorex LH158 Instruction Manual

To configure DDNS settings:
1 Visit http://lorexddns.net
DDNS account.
2 Click the DDNS tab.
3 Configure the following:
• DDNS: Select Enable.
• Server: Select LOREXDDNS (default).
• Domain Name: Enter the Domain name/
URL Request you received in the email
after registering for DDNS.
• User Name: Enter your DDNS User Name.
• Password: Enter your DDNS Device
password.
4 Click Apply to save your settings.
NOTE: Please allow 10~15 minutes for the
DDNS servers to update with your
new DDNS address before
attempting to connect.
and register for a

Alarm

The Alarm tab allows you to
configure Motion Detection
and Alarm settings.

Configuring Motion Detection

Configure motion settings to determine
the area you wish to monitor for motion
events, and the outcome if a motion
event occurs.
To configure motion settings:
1 Select the Motion tab.
2 Configure the following:
• Channel: Select the channel you wish to
configure.
• Enable: Select Enable or Disable to
activate or deactivate motion recording.
• Area: Click the Setup button to configure
the area of the screen that detects motion.
Drag mouse cursor
over desired area
Click and drag the mouse cursor to configure motion
detection areas. Motion detection is enabled in red areas
and disabled in transparent areas. Right-click to exit.
Using the Main Menu
49