Configuring Snmpv1/V2C; Configuring Snmpv3 - Xerox WorkCentre 3615 System Administrator Manual
Black and white multifunction printer
Hide thumbs
Also See for WorkCentre 3615:
- User manual (214 pages) ,
- System administrator manual (118 pages) ,
- Quick use manual (21 pages)
Table of Contents
Advertisement
Network Connectivity
Configuring SNMPv1/v2c
SNMP is a network management protocol. SNMP version 1 (SNMPv1) is the first implementation of the
SNMP protocol. It operates over protocols including UDP, IP, and IPX.
SNMP version 2 (SNMPv2c) includes improvements in performance, confidentiality, and
manager-to-manager communications over SNMPv1, however it uses the simple-community based
security scheme of SNMPv1.
1.
At your computer, open a Web browser, in the address field, type the IP address of the printer, then
press Enter or Return.
Note:
If you do not know the IP address of your printer, see
page 12.
Click Properties > Protocols > SNMP > Edit SNMPv1/v2c Properties.
2.
3.
For GET Community Name, type a name.
4.
To allow a host with this community name to perform SNMP SETS on the printer, for SET
Community Name, type a name.
5.
To allow a host with this community name to receive traps from printer, for Trap Community Name,
type a name.
6.
For up to four configurations, do the following:
a.
For Trap Address Type, select an option.
b.
For Trap Destination Address, type an IP address. IPv4 address format is x.x.x.x, where x
represents a decimal number from 0 through 255. Ensure that the value entered is a valid
address and does not start with 127 or a number from 224 through 254. IPv6 addresses
contain hexadecimal digits delimited by the colon (:) character, and can be up to 39 characters
in length.
c.
For Port Number, type a number from 0 through 65535.
d.
To send notifications to specified addresses, for Notify, select the trap types.
To enable authentication traps, for Authentication Error Trap, select Enabled.
7.
8.
Click Save Changes.
Configuring SNMPv3
SNMPv3 is the current standard version of SNMP defined by the Internet Engineering Task Force (IETF).
It provides three important security features:
•
Message integrity to ensure that a packet has not been tampered with in transit
•
Authentication to verify that the message is from a valid source
•
Encryption of packets to prevent unauthorized access
®
50
Xerox
WorkCentre
System Administrator Guide
®
3615 Black and White Multifunction Printer
Finding the IP Address of Your Printer
on
Hide quick links:
Advertisement
Table of Contents
