Configuring Mail Alerts; Configuring System Settings; Configuring Clock Settings - Xerox WorkCentre 3615 System Administrator Manual

Black and white multifunction printer
Hide thumbs Also See for WorkCentre 3615:
Table of Contents

Advertisement

Configuring Mail Alerts

You can define groups to receive email notifications when selected status alerts occur on the printer.
To configure mail alerts:
1.
From the General Setup menu, click Mail Alerts.
To have the printer send email alerts, select Enable Mail Alerts.
2.
3.
To send email alerts to the printer system administrator, next to SysAdmin Mail Address, enter a
valid address for the system administrator.
4.
To send email alerts to a service representative, next to Service Mail Address, enter a valid address
for the service representative.
5.
Under Notification Items, select each of the items to generate an email notification for the system
administrator or service representative.
6.
Click Save Changes.
7.
Next to Connection Setup, click Email Settings.
a.
Enter the From: Email Address for the printer.
b.
Next to SMTP Server, enter the IP Address or DNS Name of the SMTP server to which the
printer is connected.
If you do not know the IP Address or DNS Name of the SMTP server, click Auto Detect SMTP
Server.
Note:
Before clicking Auto Detect SMTP Server, to save any entries that you have made, click Save
Changes.
c.
Next to SMTP Port, enter the port number for the SMTP server.
d.
If the SMTP server requires authentication, select the Authentication Type, then enter the
SMTP Login Name and SMTP Password in the appropriate fields.
Click Save Changes.
e.

Configuring System Settings

Use this menu to configure general settings of the printer. For example, time to Energy Saver mode,
alarm settings, and so on.
1.
From the General Setup menu, click System Settings.
2.
Under General, enter values for the Energy Saver modes, then select values for the other selections
from each of their lists.
3.
Under Timers, for Panel Timeout, select the time from the list. For the Fault Timeout, enter the time
in seconds.
4.
Under Output Settings, for each of the items, select a value from the list.
Click Save Changes.
5.
®
®
Xerox
WorkCentre
3615 Black and White Multifunction Printer
Initial Setup
System Administrator Guide
27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents