Transport Buttons - M-Audio Trigger Finger Pro User Manual

Transport Buttons

You can configure how the Stop and Play transport buttons communicate with your DAW.
To configure the Stop and Play transport buttons:
1. Enter Control Mode by pressing the Control Mode Button (Ctrl).
2. Use the Value Dial to select Advanced (which will appear in the upper left corner of the
display).
3. Press the second Function Button (Trnsprt) to switch between the available options:
•
MIDI + MIDI Machine Control (Midi+MMC): The Stop and Play transport buttons
will send standard MIDI messages and MMC messages.
•
Mackie Control (Mackie): For use with a standard DAW that uses the Mackie
Control protocol.
•
HUI: For use with a standard DAW that uses the HUI protocol.
•
None: The Stop and Play transport buttons will not send messages to the DAW.
•
MIDI Real Time (Midi R/T): The Stop and Play transport buttons will send MIDI
Real Time messages (Start, Stop, and Continue).
•
MIDI Machine Control (MMC): The Stop and Play transport buttons will send MMC
messages.
4. Make other changes in Control Mode by pressing the second Function Button (Edit
Controls), or exit Control Mode by pressing the Control Mode Button (Ctrl) or the fourth
Function Button (Exit).
ADVANCED 01: Preset
TRNSPRT: CURSORS:
Midi+MMC Mackie
56
CTRL->
TYPE
EXIT