Select Mode - M-Audio Trigger Finger Pro User Manual

Select Mode

Select Mode lets you use the Step Switches to view or edit settings that affect the current
Sequence (rather than the Sequencer's overall function). Press and hold the Select Button to
enter this mode. When in Select Mode, the button will light up and Select Mode will appear in
the display. In Select Mode, you can:
•
press a pad and then release the Select Button to see its steps (in the currently shown
bar) represented by the lit-up Step Switches (the same as pressing a pad in Sequence
Mode).
•
set which bar of the Sequence will be shown in the Step Switches. Press Step Switch 1,
2, 3, or 4 to view the bar of that number, or press Step Switch 5 (Auto) if you always want
the currently playing bar to be shown.
•
copy and paste a pad's step pattern from one bar to another. Use Step Switches 7
(Copy) and 8 (Paste) to do this—please see Working with Sequences: Copying and
Pasting to learn about this feature.
•
duplicate a pad's sound and step pattern immediately to the next bar. (You can do this
multiple successive times to quickly copy the same pattern to multiple bars.) Use Step
Switch 9 (Duplicate) to do this—please see Working with Sequences: Duplicating to
learn about this feature.
•
set the Time Division of the Sequence and Pad Roll Mode. Use Step Switches 12-16 to
select a quarter-note (1/4), eighth-note (1/8), sixteenth-note (1/16), or thirty-second-note
(1/32) Time Division. You can use a triplet-based Time Division by pressing Step Switch
16 (Triplet).
Important: The Time Division setting affects both Sequence playback and Pad Roll Mode.
In other words, the rate of a pad roll will always correspond to the Sequence's Time
Division.
SEQUENCER
Steps 1-5: Select
the bar to view
SELECT MODE PAD BANK:A
Steps 7-9: Copy
and Paste bar
BAR:01
Steps 12-16: Pads: Select the
Time Division
28
PAD:A01
pad to view