Gate
The Gate setting determines the length of the notes (steps) of the Sequence. With a small Gate
setting, the note events of the Sequence will be very short and staccato-sounding. With a
large Gate setting, the note events will be longer and more legato-sounding.
To set the Gate of a Sequence:
1.
Enter Sequence Mode by pressing the Sequence Mode (Seq) button.
2.
Turn the third Knob (Gate) to adjust the value:
•
99% is the maximum setting (long notes)
•
0% is the minimum setting (extremely short notes; certain devices may not respond
to notes this short)
•
50% is the default setting
3.
Exit Sequence Mode by pressing the Sequence Mode (Seq) button or fourth Function
Button (Exit).
SEQUENCER
TEMPO:
SWING:
120
50%
01: Sequence
BANK:A
GATE
FIX VEL:
50%
127
BAR:01
PAD:A01
BARS:
EDIT
PAGE:
02
VELOCITY
1 of 2
71
CHANGE->
SEQUENCE
EXIT