Creating A Sequence - M-Audio Trigger Finger Pro User Manual

Creating a Sequence

There are two ways to create or edit a Sequence with Trigger Finger Pro: (A) using the pads in
real time or (B) using the Step Switches.
To record a Sequence in real time:
1. Press Trigger Finger Pro's Record button. Its Sequencer is record-armed.
2. If the Sequence is not already playing, press Play to start recording.
3. Hit the pads to record their sounds as steps in the Sequence. You can play (and therefore
record) multiple pads simultaneously. The pads' velocities will also be recorded. The
recording Sequence will loop until you stop it.
4. To stop recording, press the Record button.
5. To stop playback, press the Stop button.
To enter or erase steps in a Sequence:
1. Enter Sequence Mode by pressing the Sequence Mode (Seq) button.
2. Press the pad whose sound you want to use in the current bar. The pad number will
appear in the display, and any steps for that pad in that bar will appear in the Step
Switches.
3. To add a step to the current bar for that pad, press an unlit Step Switch.
To remove a step from the current bar for that pad, press a lit Step Switch.
4. Make other changes, or exit Sequence Mode by pressing the Sequence Mode (Seq)
button or fourth Function Button (Exit).
Learn more about Sequences in Working with Sequences.
20