Table of Contents
Advertisement
1:
2:
3:
4:
127
00
00
00
BANK:A
PAD:A01 BAR:Auto VEL:127
The Sequencer Velocity determines the default velocity level of steps you enter with the Step
Switches.
To edit the Sequencer Velocity:
1.
Enter Sequence Mode by pressing the Sequence Mode (Seq) button.
2.
Check above the third Function Button (Page) to make sure you are viewing Page 1. If
you are on Page 2, press the button to move to Page 1.
3.
Press the second Function Button (Edit Velocity). The steps of the Sequence will be
shown in the display with the steps' numbers in the first (top) row and their corresponding
velocity values below them in the second row.
4.
Turn the fourth Assignable Button (Vel) to adjust the velocity value (00–127).
5.
Make other changes, or exit Sequence Mode by pressing the Sequence Mode (Seq)
button or fourth Function Button (Exit) twice.
Tip: You can also set the Sequencer Velocity in the Preferences. See Preferences: Velocity:
Sequencer Velocity to learn more.
Important: The Sequencer Velocity value will be saved with your Preferences, not with the
Sequence.
5:
6:
7:
8:
9:
00
00
00
00
127
10:
11:
12:
13: 14:
00
00
00
00
TIE
CLR PAD CLR ALL
66
15: 16:
00
00
00
EXIT
Hide quick links:
Advertisement
Table of Contents
