Copying And Pasting - M-Audio Trigger Finger Pro User Manual

Copying and Pasting

When creating and editing Sequences, you can quickly copy and paste bars. You do not have
to be in Sequence Mode to do this; rather, you do this in Select Mode.
To copy and paste:
1. Enter Select Mode by pressing and holding the Select button. (Although you must hold
the Select button down before each step of this process, you can release it at any time
without undoing anything—just remember to press and hold it again before resuming.)
2. Select the pad whose step pattern you want to copy by pressing it. Then, select the bar
you want to copy by pressing Step Switch 1, 2, 3, or 4. (The Step Indicator with the
same number will light up aqua.)
3. Copy it by pressing Step Switch 7 (Copy).
4. Select the pad where you want to paste the step pattern by pressing it. Then, select the
bar where you want to paste the step pattern by pressing Step Switch 1, 2, 3, or 4. (The
Step Indicator with the same number will light up aqua.)
5. Paste it by pressing Step Switch 8 (Paste). The step pattern from the copied pad and
bar are now pasted onto the new pad and bar.
6. Make other changes, or exit Select Mode by releasing the Select button.
SEQUENCER
Steps 1-5: Select
the bar to view
SELECT MODE PAD BANK:A
Steps 7-9: Copy
and Paste bar
BAR:01
Steps 12-16: Pads: Select the
Time Division
73
PAD:A01
pad to view