Sequence Mode
Sequence Mode lets you adjust various parameters affecting the Sequencer's
overall function. Press the Sequence Button (Seq) to enter or exit this mode. When
in Sequence Mode, the button will light up and Sequencer will appear in the
display. In Sequence Mode, you can:
•
select a new Sequence
•
set the number of steps and bars in a Sequence
•
edit the velocity of each pad (in each bank) for each step in a Sequence
•
press a pad to see its steps (in the currently shown bar) represented by the lit-
up Step Switches
•
enter steps in a Sequence with specific and editable velocities for each pad
•
erase all steps for a specific pad in a Sequence
•
erase an entire Sequence
•
disable the Sequencer (so the transport controls communicate with your DAW
only rather than with the Sequencer)
SEQUENCER
TEMPO:
SWING:
120
50%
01: Sequence
BANK:A
GATE
FIX VEL:
50%
127
BAR:01
PAD:A01
EDIT
MAPPING:
PADS
MIDI
27
CHANGE->
SEQUENCE
EXIT