Horizon Fitness CLUB SERIES CST3.6 User Manual page 11

A SSE M BLY S T E P 4
HARDWARE BAG 4 CONTENTS :
top view
BOLT (F)
FLAT WASHER (E)
BOLT (D)
MAST
* Be sure to tighten bolts after all are lined up.
* NOTE: Be careful not to pinch any
wires while assembling the masts.
BOLT (F)
25 mm
Qty: 2
top view
ASSEMBLED IN STEP 4-C
BOLT (D)
15 mm
Qty: 6
A. Open HARDWARE BAG 4
B With running deck in lowered position,
.
place CONSOLE on upright masts.
C. Secure console by partially inserting
3 BOLTS (D) and 3 FLAT WASHERS
(E) into side of LEFT upright MAST.
Remember to partially install
these bolts.
D Gently lift right side of the CONSOLE
.
to connect the CONSOLE CABLE.
Carefully tuck wires in mast to avoid
damage. NOTE: Do not pinch console
cable. Be sure the console cable
prongs are aligned and the ends are
tightly seated into each other.
E Repeat step C above to assemble the
.
right side upright mast and console.
F. Tighten all bolts completely.*
Once BOLTS (D) have been
G.
completely tightened, insert BOLTS
(F) into the back of the mast and
completely tighten.
FLAT WASHER (E)
8 mm
Qty: 6
11