Heart Rate Test Mode - Star Trac 4500 Owner's Manual

HEART RATE TE§T MODE
Heart Rate Test Mode allows you to test the heart rate calculation and display capability of the
treadmill if it is equipped with contact rings or Polar wireless heart rate chest strap reception
capability. To enter Heart Rate Test Mode:
• Enter Manager Settings (or Maintenance Settings), then Display Test Mode:
• Press and hold
B)·
• Release (or
• Listen for a beep and see SETTINGS (or CONFIGURE) in the display momentarily.
• Release the remaining keys. See UNITS in the Alphanumeric Display.
• Press and release
• See that all LEDs are lit.
• Press and release
• See that all LEDs are dark. See the EPROM version, e.g. PWM V3.3, in the Alphanumeric
Display.
• Press any key to obtain a blank display.
• Press and release
• See SEEKING HR in the Alphanumeric Display.
• Grasp the stainless steel contact rings or place the Polar wireless heart rate chest strap around
your chest.
• See average heart rate in the Alphanumeric Display.
To leave Heart Rate Test Mode and enter Operating Mode, press and release
liB
lSTARTI
and together (or
!!iTAR TRAC 4500 TREADMILL Owner's Manual
[STARTI
and together).