Calibration & Test Modes; Embedded Screen Elevation Calibration Procedure; Calibrates The Incline Of The Treadmill - Star Trac 8-TRx Service Manual

Calibration & Test Modes
The new elevation calibration procedure
S-Series (LCD Screens) treadmill elevation. The procedure replaces the earlier procedure where spe-
cific values needed to be entered. For complete details on embedded screen maintenance modes,
see the OpenHub Service Manual. Embedded Calibration instructions are the same for all units.

Embedded Screen Elevation Calibration Procedure

Calibrates the incline of the treadmill:

While in Home Screen, press "VOL Up, CH/TRK Up, and 3" simultaneously.
1.
2. Service Menu will now be displayed.
3. Select the Calibration and Setup sub-menu from the list
4. Enter the password 218 on the pop up window requesting a Password.
5. Select Incline Calibration on the Calibration and Setup screen.
Press START to begin the calibration.
6.
7. After the Incline Calibration is completed, press EXIT; The Calibration And Setup screen appears.
Press Cancel to exit and go back to the Home Screen.
8.
9. The Incline Calibration has been completed.
1 Procedure is duplicated from https://support.corehandf.com/637-8469, check online for any updates after publication.
1 is used to calibrate 8 Series (LED Screens), E-Series and
Warning: Belt in motion is dangerous
Do not stand on or straddle belt during a calibration procedure.
Page 36