Table of Contents
Advertisement
Configuration
Setting Video Loss Notifications
1.
2.
3.
Actions 2 Tab settings
In the Video Loss Actions 2 tab, you can choose PTZ camera preset positions and spot
monitor actions.
Highlight the Actions 2 tab. The Video Loss Actions 2 screen displays.
90
Note
For the Alarm-Out action, the alarm output and beep you select
should be set to the Event mode in the Alarm-Out setup screen
(Schedule tab).
Highlight the desired field under the Notify heading, and press
Loss Notify menu appears.
Figure 3-65
Video Loss Notify Menu
You can toggle the entire list On and Off by highlighting Notification and
pressing
.
You can toggle the individual items On and Off by highlighting them and pressing
.
Highlight OK and press
Note
For the Notify action, the notify item you select should be
enabled in the Notification setup screen and the DVR should be
registered in the RASplus (Remote Administration System).
Figure 3-66
Video Loss Actions 2 Screen
to accept your changes.
. The Video
Advertisement
Table of Contents
