Configuration
Selecting PTZ Presets
You can preset the position for each PTZ camera and to where you want each PTZ
camera to move whenever the DVR detects motion on the selected camera.
1.
2.
3.
4.
Associating Spot Monitors with Cameras
A Spot monitor can be associated with a camera. The DVR displays the associated
camera on the Spot monitor whenever it detects motion on the selected camera.
1.
2.
3.
Save your Motion Detection changes by highlighting Save and pressing
Cancel to exit the screen without saving the changes.
Video Loss Screen
You can use the Video Loss function to see if anything is obscuring the camera.
Document 800-00918 Rev F
02/08
Highlight the desired field under the PTZ heading, and press
Detection 1: PTZ setup screen appears.
Select the PTZ field next to the desired camera, and press
presets appears.
Figure 3-62
PTZ Preset Screen
Select the PTZ preset from the list.
Select OK and press
Highlight the desired field under the Spot Monitor heading, and press
of Spot monitors and cameras appears.
Select from the list of spot monitors and cameras.
Select OK and press
to load the settings.
to load the settings.
. The Motion
. A list of PTZ
. A list
. Select
87