Figure 3-64 Video Loss Actions 1 Screen - Honeywell HRSD16 User Manual

Configuration
Selecting a Camera or Cameras for Recording
You can set the DVR to start recording video from all the associated cameras if the DVR
detects video loss on the selected camera.
1.
2.
Setting Alarm-Out Actions
You can associate Alarm-Outs with a selected camera. When the DVR detects video
loss on the selected camera, it triggers output signals on the associated Alarm-Out
connectors. You can also have the DVR internal buzzer sound if video is lost on the
selected camera.
1.
2.
3.
Document 800-00918 Rev F
02/08
Figure 3-64 Video Loss Actions 1 Screen
Highlight the desired field under the Record heading, and press
cameras appears.
Select the cameras that you want the DVR to record when video loss is detected.
If the DVR detects video loss on the selected camera, it starts recording video
from all the associated cameras.
Note For the Record action, the camera you select should be set to
the Event or Time & Event recording mode in the Record
Schedule setup screen (see
Highlight the desired field under the Alarm-Out heading, and press
Alarm Outputs appears.
Select the Alarm Output connectors that you would like to activate whenever the
DVR detects video loss on the selected camera.
Select OK and press
page
to accept the changes.
. A list of
71).
. A list of
89