Honeywell HRSD16 User Manual page 132

8-16 channel models color digital video recorder
Hide thumbs Also See for HRSD16:
Table of Contents

Advertisement

Operation
Highlight Close and then press
to check the progress.
See
have copied. You do not need to install any special software on your personal computer
to review the video clips.
Caution
132
Appendix C, Reviewing Video Clips
Note
During Clip Copy, you cannot shut the system down, clear data
on the storage device, or format the storage device.
Do NOT disconnect the USB cable or the power from the external
drive while copying video clips. If the external drive is shut down
or the USB cable is disconnected while copying video clips, then
THE DVR SYSTEM MAY NOT WORK NORMALLY OR THE
EXTERNAL DRIVE COULD BE DAMAGED. You will get an error
message the next time you try to copy video clips. You will need to
power down the DVR and restart it to get rid of the error message.
If the file system of the USB-IDE hard disk drive has been
corrupted, then this error message cannot be dismissed. Even
after restarting the DVR it may automatically restart while
preparing to clip copy. You must recover the file system using the
recovery program, or you must reformat the hard disk drive.
. You can return to the Clip-Copy screen at any time
for instructions on how to review video clips you

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hrsd8

Table of Contents