Figure 3-16 Storage Status Screen; Table 3-3 Storage Status Information - Honeywell HRSD16 User Manual

Configuration
Column Information
Type The Type column displays the type of storage device.
Disk Bad The Disk Bad column displays the percentage of bad sectors.
Not Formatted indicates the device is not formatted.
Temperature The Temperature column displays the temperature of the storage device.
The S.M.A.R.T. column displays Good, Bad, or N/A, depending on storage
S.M.A.R.T.
conditions.
•
•
•
Select Close and press
Document 800-00918 Rev F
02/08
Figure 3-16 Storage Status Screen
Table 3-3 Storage Status Information
Good: The storage condition is normal.
Bad: Data cannot be written on or read from the storage device.
N/A: Storage conditions are normal. However, the S.M.A.R.T. monitoring is
not working or supported.
When the storage condition is Bad, the Event Status - Storage
Note
screen appears, and you can check the storage condition for
details. If the Bad message displays, it is recommended that you
replace the hard disk drive, usually within 24 hours.
Note Temperature and S.M.A.R.T. information is available only for IDE
hard disk drives that support the S.M.A.R.T. (Self-Monitoring
Analysis and Reporting Technology) monitoring program.
to exit the Storage Status screen.
45