Table of Contents
Advertisement
Operation
Caution
Naming a Video Clip File
The DVR automatically assigns a file name to the video clip. However, you can give the
video clip file a different name.
1.
2.
3.
4.
5.
Using the DVR While Backing Up Video
You can use other functions on the DVR while video is being backed up.
Document 800-00918 Rev F
02/08
The USB device for clip copy must be FAT 16 or FAT 32 format.
Note
While copying video clips on the CD-RW, the recording speed
might decrease.
Highlight the field beside File Name and then press
appears.
Enter a file name for the video you are backing up and then select Close. The
DVR automatically adds the camera number (for example, 01) and .exe to the file
name. If you want to save the file in a specific folder, enter the folder name
followed by a /. For example: folder/filename
Note
When naming a file, you cannot use the following characters:
\, /, :, *, ?, ", <, >, |.
Highlight Start and then press
The confirmation screen displaying data size appears. When the storage device
does not have enough space, the DVR asks if you want to copy as much of the
video clip as possible in the available space.
Highlight Continue and then press
After the clip copy starts, select Cancel to cancel it or Close to hide the screen.
When selecting Close, Clip Copy continues and a confirmation screen displays
when complete.
Note
The file size for clip copy is limited to 2 GB.
after you have given the video clip a file name.
to continue clip copy.
. A virtual keyboard
131
Advertisement
Table of Contents
