Figure 3-29 Dvrns Setup Screen; Table 3-5 Modem Setup Screen Options - Honeywell HRSD16 User Manual

Configuration
DVRNS Setup
Highlight the DVRNS tab in the Network screen. The DVRNS screen appears.
56
Note If the RS-232C port is in use for remote control, networking
cannot be configured for a modem.
Table 3-5 Modem Setup Screen Options
Option Action
Enable Highlight Enable and press
You can only change the settings if Modem is enabled.
Baud Rate Highlight the field beside Baud Rate and press
baud rates ranging from 300 to 115,200 appears.
Data Bit Highlight the field beside Data Bit and press
between 7 bit and 8 bit formats.
Stop Bit Highlight the field beside Stop Bit and press
between 1 and 2 Stop Bits.
Parity Highlight the field beside Parity and press
list appears. You can select from None, Odd, or Even parity.
Figure 3-29 DVRNS Setup Screen
to toggle between On and Off.
. A list of
. Choose
. Choose
. A drop-down