Ptz; Ptz Popup Menu; Create Ptz Preset Position - Honeywell H.264 HRDP User Manual

Operation

PTZ

PTZ Popup Menu

Create PTZ Preset Position

______________________________________________________________________________________________
62
To enter PTZ mode:
•
Right-click the Live screen and select PTZ on the pop-up menu, or
•
Click the PTZ icon on the Tool menu on the bottom of the main
screen.
Drag the mouse up/down or left/right to move pan/tilt position of the
camera. As you move the mouse away from the center of the screen, the
camera movement speed increases. You can also zoom-in/out by using the
scroll wheel on the mouse.
Note Full PTZ functions are available using the front panel buttons, a
mouse, the IR remote control, or a keyboard controller.
Right-click the desired camera to open the PTZ Popup menu while in PTZ
mode.
ZOOM Zoom in/out on PTZ
camera. Enabled by
default in PTZ mode
FOCUS Adjust focus on PTZ
camera.
IRIS Adjust the iris on PTZ
camera.
PRESET Go to preset position.
Select the preset
number. The maximum
preset number is 255
PRESET Start preset tour.
TOUR PRESET TOUR will
sequence though all
preset positions. Can
only be enabled while in
full screen mode.
1. Right-click the desired PTZ camera to open the PTZ Popup menu while
in PTZ mode.
2. Select a PTZ Preset ID number
3. Select MOVE under PRESET to move the camera to the desired
position.
4. Select SET to save the preset position.