Connecting The Fm/Am Antennas - Yamaha RX-V775 Owner's Manual

Av receiver

Hide thumbs Also See for RX-V775:

Setup manual (59 pages)

Setup manual (8 pages)

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

Table of Contents

1 2 3 4

Playback device connections

❑ MHL connection

Connect an MHL-compatible mobile device (such as smartphones) to the unit with an

MHL cable. You can enjoy full HD videos and multichannel audio sources stored on the

mobile device. The VIDEO AUX jack of the unit enables you to input videos and audio

directly from the mobile device to the unit.

NET

DVD

PHONES

YPAO MIC

TONE

CONTROL

PROGRAM

SILENT CINEMA

The unit (front)

MHL output

MHL

Mobile device

If you select "V-AUX" as the input source by pressing V-AUX, the video/audio played

back on the mobile device will be output from the unit.

• To watch videos input to the VIDEO AUX jack, you need to connect your TV to the HDMI OUT jack of the

unit (p.23 to 26).

• You need to prepare an MHL cable that match the jack on your mobile device.

• You can operate the mobile device using the menu operation keys, external device operation keys and

numeric keys on the remote control. However, some features may not be compatible, depending on the

mobile device or its application. In this case, operate the mobile device itself.

• If "Standby Through" (p.97) in the "Setup" menu is set to "On", you can output mobile device videos/audio

to the TV or operate the mobile device using the remote control of the unit even when the unit is in standby

mode.

• The unit supplies power to the mobile device in the following conditions.

– The unit is turned on.

– The unit is in standby mode while "Standby Through" (p.97) in the "Setup" menu is set to "On".

6 7 8 9 10

FM/AM antenna connections

RADIO

VIDEO AUX

STRAIGHT

HDMI/

VIDEO

2.1A

MHL 5V

MHL