Sound; Dynamic Range - Yamaha RX-V775 Owner's Manual

■
Test Tone
Enables/disables the test tone output. Test tone output helps you to adjust the speaker
balance or equalizer while confirming its effect.
Settings
Off (default) Does not output test tones.
Outputs test tones automatically when you adjust the speaker balance
On
or equalizer.

Sound

Configures the audio output settings.
■
Lipsync
Adjusts the delay between video and audio output.
❑ Delay Enable
Enables/disables the Lipsync adjustment for each input source.
Choices
HDMI 1–5, AV 1–6, V-AUX, AUDIO 1–2
Settings
Disable Disable the Lipsync adjustment for the selected input source.
Enable (default) Enables the Lipsync adjustment for the selected input source.
❑ Auto/Manual Select
Selects the method to adjust the delay between video and audio output.
Setting range
Adjusts the delay between video and audio output automatically when
a TV that supports an automatic lipsync function is connected to the
unit via HDMI.
Auto (default)
If necessary, you can fine-adjust the audio output timing in
"Adjustment".
Select this option when you want to adjust the delay between video
Manual and audio output manually.
Adjust the audio output timing in "Adjustment".
• Even if "Auto/Manual Select" is set to "Auto", the automatic adjustment does not work depending on the TV
connected to the unit. In this case, adjust the delay manually in "Adjustment".
❑ Adjustment
Adjusts the delay between video and audio output manually when "Auto/Manual
Select" is set to "Manual". You can fine-adjust the audio output timing when
"Auto/Manual Select" is set to "Auto".
Setting range
0 ms to 500 ms (1 ms increments)
Default
0 ms
• "Offset" shows the difference between automatic adjustment and fine adjustment.
■

Dynamic Range

Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and
DTS signals) playback.
Settings
Maximum (default) Produces audio without adjusting the dynamic range.
Standard Optimizes the dynamic range for regular home use.
Sets the dynamic range for clear sound even at night or at low
volumes.
Minimum/Auto
When playing back Dolby TrueHD signals, the dynamic range is
automatically adjusted based on the input signal information.
CONFIGURATIONS ➤ Configuring various functions (Setup menu)
94
En