Connecting Speakers - Yamaha RX-V775 Owner's Manual

1 2 3 4 5 6 7 8 9 10
Speaker connections
2

Connecting speakers

Connect the speakers placed in your room to the unit.
The following diagrams provide connections for 7.1+2-,
7.1-, and 6.1-channel systems as examples. For other
systems, connect speakers while referring to the
connection diagram for the 6.1-channel system.
Caution
• Remove the unit's power cable from an AC wall outlet and turn
off the subwoofer before connecting the speakers.
• Ensure that the core wires of the speaker cable do not touch
one another or come into contact with the unit's metal parts.
Doing so may damage the unit or the speakers. If the speaker
cables short circuit, "Check SP Wires" will appear on the front
display when the unit is turned on.
• The illustrations of the unit (rear) used in this section are of the
RX-V775.
Cables required for connection
(commercially available)
Speaker cables (x the number of speakers)
+ +
– –
Audio pin cable (two for connecting two subwoofers)
7.1+2-channel system
ZONE2/F.PRESENCE
The unit (rear)
SPEAKERS
FRONT CENTER SURROUND SURROUND BACK/BI-AMP
CENTER CENTER
1
2
SUBWOOFER
Q
1 2
9 3
4
6 7
7.1-channel system
(using surround back speakers)
EXTRA SP
The unit (rear)
CENTER CENTER
SINGLE
1
2
SUBWOOFER
W
9 9
5 4
6
PREPARATIONS ➤ Connecting speakers
EXTRA SP
ZONE2/F.PRESENCE
SPEAKERS
FRONT CENTER SURROUND SURROUND BACK/BI-AMP
SINGLE
1 2
3
5
7
19
En