Connecting To A Network - Yamaha RX-V775 Owner's Manual

1 2 3 4 5 6
Network connections
6

Connecting to a network

Connect the unit to your router with a commercially-available STP network cable (CAT-5
or higher straight cable).
You can enjoy Internet radio or music files stored on media servers, such as PCs and
Network Attached Storage (NAS), on the unit.
Internet
Network Attached Storage
(NAS)
WAN
PC
LAN
Modem
Router
Network cable
Mobile device
TRIGGER OUT
12V 0.1A
DC OUT NETWORK
(such as iPod touch
HDMI OUT
5V 0.5A (NET)
IN
1
and iPhone)
ARC
OUT
REMOTE
OPTICAL VIDEO
(TV)
AV4
COAXIAL
AV3
Y P P R
B
AV2
VIDEO
OPTICAL
AV 1
COMPONENT VIDEO
AUDIO 1 AUDIO 2 AV 5
7 8 9 10
HDMI 1 HDMI 2
(BD/DVD)
2
AM FM
COMPONENT
VIDEO
(RADIO)
P
R
ANTENNA
P
B
VIDEO
Y
MONITOR OUT
SINGL
The unit (rear)
ZONE 2 FRONT SURROUND SUR. BAC
AV 6
AV OUT ZONE OUT PRE OUT
• If you are using a router that supports DHCP, you do not need to configure any network settings for the unit,
as the network parameters (such as the IP address) will be assigned automatically to it. You only need to
configure the network settings if your router does not support DHCP or if you want to configure the network
parameters manually (p.98).
• You can check whether the network parameters (such as IP address) are properly assigned to the unit in
"Network" (p.104) in the "Information" menu.
• Some security software installed on your PC or the firewall settings of network devices (such as a router)
may block the access of the unit to the network devices or the Internet. In these cases, configure the
security software or firewall settings appropriately.
• Each server must be connected to the same subnet as the unit.
• To use the service via the Internet, broadband connection is strongly recommended.
PREPARATIONS ➤ Connecting to a network
33
En