Controlling External Devices With The Remote Control; Registering The Remote Control Code For A Tv - Yamaha RX-V775 Owner's Manual

SOURCE
SOURCE RECEIVER RECEIVER
HDMI HDMI
1 1 2 2 3 3 4 4
You can use the unit's remote control to operate external devices
5 5 V-AUX V-AUX
(such as BD/DVD players) if you have registered the remote control
AV AV
1 1 2 2 3 3 4 4 code of the external device.
AUDIO AUDIO
5 5 6 6 1 1 2 2
TUNER TUNER USB USB NET NET
MAIN MAIN ZONE 2 ZONE 2 PARTY PARTY HDMI OUT HDMI OUT • You cannot control an external device that does not have a remote control sensor.
• Ensure that the remote control ID of the external device is set to "ID1". If any other
SCENE SCENE
BD BD
TV TV NET NET RADIO RADIO
DVD DVD
• If the unit's remote control is without batteries for more than 2 minutes, the
PROGRAM PROGRAM MUTE MUTE VOLUME VOLUME
TOP MENU TOP MENU POP-UP/MENU POP-UP/MENU
• Under the unit's default settings, the amplifier code (Yamaha: 5098) is set for all
ON ON
OPTION OPTION
SCREEN SCREEN
ENTER ENTER
RETURN RETURN DISPLAY DISPLAY

Registering the remote control code for a TV

BAND BAND
MODE MODE
TUNING TUNING PRESET PRESET
You can use the unit's remote control to operate a TV if you have
SUR. DECODE SUR. DECODE STRAIGHT STRAIGHT
MOVIE MOVIE MUSIC MUSIC
registered its remote control code.
ENHANCER ENHANCER PURE DIRECT PURE DIRECT
INFO INFO SLEEP SLEEP
1 2 3 4
Numeric keys
5 6 7 8
• You can also register your TV's remote control code to the unit's input selection
MEMORY
9 0 10 ENT
TV
TV operation keys
INPUT
TV z
TV VOL TV CH
• (RX-V775 [China, Korea, U.K. and Europe models] only)
MUTE CODE SET
CODE SET
1
2

Controlling external devices with the remote control

ID is selected, the remote control operations may not work properly.
registered codes may be cleared. If this happens, insert new batteries and register
the codes again.
the input selection keys. With this setting, you can control HDMI
Control-compatible devices connected to the unit with the remote control. (This
function may not work depending on the specification of the external device.)
keys (p.109). This would allow you to use the cursor keys or numeric keys to
operate the TV (this function may not be available on some TV models).
You can also assign a function to each key using the learning function (p.110).
Use "Remote Control Code Search" in the CD-ROM
to find your TV's remote control code.
• If there are multiple remote control codes, register the first code in the list.
If that does not work, try the other codes.
Press CODE SET.
SOURCE blinks twice.
Perform each of the following steps within 1 minute.
Otherwise, the setting will be canceled. If this happens,
repeat from Step 2.
3
Press TV z.
4
Use the numeric keys to enter the 4-digit remote
control code.
Once the remote control code is successfully registered, SOURCE
blinks twice.
If it blinks six times, registration has failed. Repeat from Step 2.
■
TV operations
Once you have registered the remote control code for your TV, you
can control it using the TV operation keys, regardless of the input
source selected on the unit.
TV operation keys
CONFIGURATIONS ➤ Controlling external devices with the remote control
INPUT Switches the video inputs of the TV.
MUTE Mutes the audio output of the TV.
TV VOL Adjust the volume of the TV.
TV CH Switch the channels of the TV
TV z
Turns on/off the TV.
108
En