Connecting Audio Devices (Such As Cd Players); Connecting To The Jacks On The Front Panel - Yamaha RX-V775 Owner's Manual

1 2 3 4
Playback device connections

Connecting audio devices (such as CD players)

Connect audio devices such as CD players, MD players, and a turntable to the unit.
Depending on the audio output jacks available on your audio device, choose one of the
following connections.
Audio output jacks on audio device
Digital optical
Digital coaxial
Analog stereo
Turntable (PHONO)
* RX-V775 only (except for U.S.A. and Canada models)
The unit AV 1–6 jacks
(rear) AUDIO 1–2 jacks
TRIGGER OUT
12V 0.1A
DC OUT NETWORK HDMI 1 HDMI 2
5V 0.5A HDMI OUT (BD/DVD)
(NET)
IN
1 2
ARC
OUT
REMOTE
AM FM
OPTICAL VIDEO
OPTICAL
(TV)
COMPONENT
AV4 O
VIDEO
COAXIAL
(RADIO)
P
R
ANTENNA
AV3
Y P P R
B
COAXIAL
P
B
AV2
VIDEO C VIDEO
OPTICAL
Y
AV 1 MONITOR OUT
COMPONENT VIDEO
L
ZONE 2 FRONT SURROUND R
AUDIO 1 AUDIO 2 AV 5 AV 6 AV OUT ZONE OUT PR
L
GND
R
PHONO
Ground lead
PHONO jacks*
If you select the input source by pressing AV 1–6, AUDIO 1–2 or PHONO*, the audio
played back on the audio device will be output from the unit.
When connecting a turntable
(RX-V775 only [except for U.S.A. and Canada models])
• The PHONO jack of the unit is compatible with an MM cartridge. To connect a turntable with a
low-output MC cartridge, use a boosting transformer.
• Connecting the turntable to the GND terminal of the unit may reduce noise in the signal.
5 6 7 8 9 10
Audio output jacks on the unit
AV 1 (OPTICAL)
AV 4 (OPTICAL)
AV 2–3 (COAXIAL)
AV 5–6 (AUDIO)
AUDIO 1–2
PHONO*
Audio output
(either digital optical,
digital coaxial, or analog stereo)
O
OPTICAL
C
COAXIAL
Audio device
L
L
R
R
PHONO
L
L
R
R
GND
Turntable
Audio output (PHONO)

Connecting to the jacks on the front panel

Use the VIDEO AUX jack to temporarily connect a playback device to the unit.
Use the USB jack to connect an iPod or a USB storage device. For details, see
"Connecting an iPod" (p.58) or "Connecting a USB storage device" (p.62).
Before making a connection, stop playback on the device and turn down the volume on
the unit.
❑ HDMI connection
Connect an HDMI-compatible device (such as game consoles and camcorders) to the
unit with an HDMI cable.
BD
TV NET
DVD
PHONES YPAO MIC TONE CONTROL PROGRAM
SILENT CINEMA
The unit (front)
Game console
Camcorder
If you select "V-AUX" as the input source by pressing V-AUX, the video/audio played
back on the device will be output from the unit.
• To watch videos input to the VIDEO AUX (HDMI IN) jack, you need to connect your TV to the HDMI OUT
jack of the unit (p.23 to 26).
• You need to prepare an HDMI cable that match the output jacks on your device.
• When "USB" is selected as the input source, video signals input to the VIDEO jack are output from the
HDMI OUT and MONITOR OUT (VIDEO) jacks.
PREPARATIONS ➤ Connecting playback devices
RADIO
VIDEO AUX
STRAIGHT
HDMI/ VIDEO 5V 2.1A
MHL 5V 1A
HDMI
31
En