Controlling External Devices With The Remote Control; Registering The Remote Control Code For A Tv - Yamaha RX-V575 Owner's Manual

Controlling external devices with the remote control

CODE SET
CODE SET
SOURCE RECEIVER
SOURCE/RECEIVER
You can use the unit's remote control to operate external devices
HDMI HDMI
1 1 2 2 3 3 4 4
(such as BD/DVD players) if you have registered the remote control
MHL MHL
1 1 2 2 3 3 5 5
code of the external device.
AV AV
4 4 5 5 6 6 A A
V-AUX V-AUX USB USB NET NET B B
ZONE ZONE
• You cannot control an external device that does not have a remote control sensor.
AUDIO AUDIO
TUNER TUNER
• Ensure that the remote control ID of the external device is set to "ID1". If any other
FM FM AM AM
ID is selected, the remote control operations may not work properly.
PRESET PRESET TUNING TUNING
INFO INFO MEMORY MEMORY
• If the unit's remote control is without batteries for more than 2 minutes, the
MOVIE MOVIE MUSIC MUSIC SUR. DECODE SUR. DECODE STRAIGHT STRAIGHT
registered codes may be cleared. If this happens, insert new batteries and register
the codes again.
ENHANCER ENHANCER DIRECT DIRECT
SLEEP SLEEP
SCENE SCENE
BD BD
TV TV NET NET RADIO RADIO
DVD DVD
SETUP SETUP OPTION OPTION • Under the unit's default settings, the amplifier code (Yamaha: 5098) is set for all
the input selection keys. With this setting, you can control HDMI
Control-compatible devices connected to the unit with the remote control. (This
ENTER ENTER VOLUME VOLUME
function may not work depending on the specification of the external device.)
RETURN RETURN DISPLAY DISPLAY
TOP TOP POP-UP POP-UP
MUTE MUTE

Registering the remote control code for a TV

MENU MENU MENU MENU
MODE MODE
You can use the unit's remote control to operate a TV if you have
1 2 3 4
registered its remote control code.
Numeric keys
5 6 7 8
9 0 10 ENT
TV
TV operation keys
• You can also register your TV's remote control code to the unit's input selection
INPUT
TV VOL TV CH TV z
keys (p.86). This would allow you to use the cursor keys or numeric keys to
MUTE
operate the TV (this function may not be available on some TV models).
1
2
Use "Remote Control Code Search" in the CD-ROM
to find your TV's remote control code.
• If there are multiple remote control codes, register the first code in the list. If
that does not work, try the other codes.
Press CODE SET using a pointed object such as the
tip of a ballpoint pen.
SOURCE/RECEIVER blinks twice.
Perform each of the following steps within 1 minute.
Otherwise, the setting will be canceled. If this happens,
repeat from Step 2.
3
Press TV z.
4
Use the numeric keys to enter the 4-digit remote
control code.
Once the remote control code is successfully registered,
SOURCE/RECEIVER blinks twice.
If it blinks six times, registration has failed. Repeat from Step 2.
■
TV operations
Once you have registered the remote control code for your TV, you
can control it using the TV operation keys, regardless of the input
source selected on the unit.
TV operation keys
CONFIGURATIONS ➤ Controlling external devices with the remote control
INPUT Switches the video inputs of the TV.
MUTE Mutes the audio output of the TV.
TV VOL Adjust the volume of the TV.
TV CH Switch the channels of the TV
TV z
Turns on/off the TV.
85
En