Lcd Monitor/Wireless Receiver - Lorex LW2702 series Instruction Manual

Digital wireless quad lcd surveillance system with built-in video recorder/intercom and indoor/outdoor motion camera
Hide thumbs Also See for LW2702 series:
Table of Contents

Advertisement

LCD Monitor/Wireless Receiver

LCD Monitor/Wireless Receiver
1
2
3
4
5
6
7
Rear Panel
1.
Wireless Antenna: Position the antenna as needed for best reception.
2.
Power: Slide button to turn the LCD receiver ON/OFF.
3.
MENU: Press to open the Main Menu.
4.
Channels/Navigation Joystick: QUAD MODE ONLY—Move UP to view camera 1, RIGHT (2) to view camera 2, DOWN (3) to
view camera 3, and LEFT (4) to view camera 4; move UP/DOWN/LEFT/RIGHT to navigate menus; press the joystick to
confirm menu selections.
5.
TALK: Press to talk using the Intercom; release to listen.
6.
Microphone: Microphone for two-way audio.
7.
DC 5V: Connect the included power adapter.
8.
Wall Hanger: Use hole to hang the LCD Receiver like a picture frame.
9.
Mounting Hole: Attach the included under-the-counter mount to mount the LCD Receiver underneath a counter/cupboard,
wall, or ceiling.
10. SD Card Slot: Insert up to a 16GB SD card.
11. AV OUT: Connect the Audio/Video cable to view video on an external TV or monitor (
12. Support Stand: Attach the included support stand to position the LCD receiver like a picture frame.
13. Speaker: Speaker for two-way audio.
10
8
optional
)
Pair
VGA
/
QVGA
9
10
13
11
12

Advertisement

Table of Contents
loading

Table of Contents