National Instruments DAQ PCI E Series User Manual page 96

© National Instruments Corporation
Appendix A
DMA modes .......................................Scatter-gather
Configuration memory size .................512 words
Transfer Characteristics
Relative accuracy................................±0.5 LSB typ dithered,
DNL....................................................±0.5 LSB typ, ±1 LSB max
No missing codes ................................12 bits, guaranteed
Offset error
State
Pregain error after calibration
Pregain error before calibration
Postgain error after calibration
Postgain error before calibration
Gain error (relative to calibration reference)
After calibration (gain = 1)...........±0.02% of reading max
Before calibration.........................±2.5% of reading max
Gain 1 with gain error
adjusted to 0 at gain = 1 ..............±0.02% of reading max
Amplifier Characteristics
Input impedance
Normal powered on ......................100 G
Powered off ..................................820
Overload ......................................820
Input bias current ................................±200 pA
Input offset current .............................±100 pA
Specifications for PCI-MIO-16E-1, PCI-MIO-16E-4, and PCI-6071E
±1.5 LSB max undithered
PCI-MIO-16E-1
PCI-6071E
±12 V max
±2.5 mV max
±0.5 mV max
±100 mV max
A-3
PCI-MIO-16E-4
±16 V max
±4.0 mV max
±0.8 mV max
±200 mV max
in parallel with 100 pF
min.
min.
PCI E Series User Manual